Wolf 8″ Bench Grinder

// Suitable for fine and coarse grinding.
// Fitted with anti-vibration mounts and fixing holes allowing for the grinder to be fixed to a workbench.
// Dust protection on/off switch for maximum protection
// Fitted with two 8″ grinding wheels 1x coarse 36 grit grinding wheel and 1x fine 60 grit grinding wheel for a wide variety of applications
// Supplied with 2 safety shields
// Powerful 350w motor
 
No workshop is complete without a Bench Grinder!
 
Wolf as a Tool manufacturer for over a century is so aware of this and hence their range of bench grinders which are professionally designed to be operated in workshops, maintenance departments as well as garages and ideal for home users.
 
A cast alloy body of flat-front design houses a 230v 350w induction motor, providing sufficient power for the work this type of machine is put to. The centre motor spindle protrudes from both sides of the central housing and is supported on ball bearings in the side casing journals; the spindle ends are threaded to fix the 8” grinding wheels with dished clamping washers and nuts. The front face has a specification plate above the on/off switch.
 
Steel safety guards are mounted around both wheels and each consists of an inner plate which stays in place but the outer is removable to facilitate stone replacement or service.
 
Whilst the stones are balanced to themselves in manufacture grinding wheels have to be “Trued by dressing” on the grinder.
 
The grinding wheels have lead centres to allow for ‘truing’ with a dressing wheel to ensure an exceptionally smooth action.
 
Clear eye shields are fitted to the front top of the guards to protect the eyes (although we do recommend that a pair of CE approved safety goggles are to be worn when using any grinding tool).
The Tool rests bolted to the inner guards are adjustable to suit the job in hand.
 
Anti-vibration mountings and bench fixing holes are provided enabling the grinder to be bolted to a bench or stand.
 
Supplied with two grinding wheels 200mm diameter, 20mm wide, bore 16mm; coarse 36 grit & fine 60 grit.
 
Technical Specification:
// 350W Induction motor
// No load speed: 2950rpm
// Fine grinding stone: 200mm dia x 20mm – 60 grit
// Coarse grinding stone: 200mm dia. x 20mm – 36 grit
// Spindle bore 16mm dia
// 2 x Protective eye shields
// 2 x Tool rests                                                                 
// 2 Years warranty
 
SPARE 200 mm dia Grinding wheels held in stock.
 
Never keep blunt or dull tools ever again, use the Wolf grinder and get to work straight away!