Wolf Gas / No Gas Welding MIG 150T With Co2 Gas Cylinder

This Wolf Professional 150T Turbo Fan cooled Combination Gas/No Gas MIG Welder has so many impressive features and is such a versatile MIG Welder with such a simple and quick way to convert this high performance machine! 

This welder is supplied ready for ‘gas’ MIG welding but offers the facility to convert to ‘no gas’ MIG welding with additional accessories (not included). So whilst ‘Gas’ MIG welding may be suitable for your current needs, should in the future you need a ‘no Gas MIG’, this machine is easily interchangeable between the two types with a simple polarity change (requiring no tools) and the purchase of some optional accessories.

Supplied with a comprehensive range of accessories for you to start welding, the Wolf MIG 150T welder with its non live torch is a pleasure to use.

It develops a smooth DC output for ease of operation and impressive results. Incorporating 6 selectable power output settings, you can select the best setting for the job in hand. The welding current range can be set from 30 amps to 135 amps. With fully variable wire speed control, you can adjust the wire speed to suit precisely the work. The regular welder will welcome the inbuilt turbo fan cooling system allowing extended welding duty cycles.

The performance of this machine will not fail to impress. If you’ve never owned a DC output MIG welder before, you’ve never experienced just how straight forward obtaining good welding results can be. 

Note: This welder is supplied without a fitted plug. This is because we only recommend using a 32 amp rated plug due to the amperage draw required, this improves the performance and longevity of the welder components. You can also use a dedicated hard wired supply. We also recommend where possible to use an isolator and independent circuit breaker (rated above 32amp). If in doubt, please contact a certified electrician for additional guidance.

Included:
– 1 x Mini spool of flux cored MIG wire
– 1 x Mini spool of 0.8mm mild steel copper coated MIG wire
– 2 x 0.6mm tips
– 2 x 0.8mm tips
– 1 x 0.9mm MIG tip
– 1 x spare torch shroud
– 1 x 0.6mm / 0.8mm wire drive roller
– 1 x mini gas regulator
– 1 x chipping hammer/wire brush
– 1 x hand held face shield to the latest CE safety standards with 350mm of face and hand guarding
– 1 x Co2 Gas Cylinder